国产无遮挡裸体免费视频_欧美国产国产综合视频_亚洲香蕉久久综合网_俺去俺来也最新色官网_久久亚洲精品成人无码av无广告

Techcon TS9200DPneumatic diaphragm injection valve

TS9200D non-contact injection valve can spray viscosity up to400000CpsThe fluid. High speed spraying can spray hundreds of precise droplets per second.

The TS9200D series injection valve adopts a unique diaphragm design. The independent and easily replaceable diaphragm component makes the seals that traditional injection valves do not have redundant, eliminating the need for disassembly, cleaning, and replacement of traditional seals, greatly saving time and costs. Due to the very small volume of the designed diaphragm, high-speed jet frequencies can be achieved. This unique design reduces the power required for glue spraying and the spraying frequency can be adjusted, providing users with a wider process window.

Advantages of TS9200D

1. High speed. Can spray per second300A precise droplet, compared to traditional spray valves, has increased50%The output.

2. Easy to clean. There are only two components that come into contact with the liquid. Traditional injection valves can contain up to8A component that needs to be cleaned. Since only two components need to be cleaned, cleaningTS9200DIt only takes a few minutes and there is no need to remove the injection valve from the machine. Without the need for careful calibration of the spray valve, the diaphragm and nozzle plate can be installed immediately, saving valuable production time and eliminating the need for dedicated personnel for offline cleaning.

3. Widely applicable.TS9200DThe high droplet velocity is suitable for a variety of liquids and has a wider range of applications. In addition, the ease of adjusting droplet velocity enables process fine-tuning, thereby helping users achieve high process capability and a wide process window.

4. Low temperature. The advanced driving circuit provides energy for the operation of the injection valve and reduces the driving energy during the idle period of the injection valve. At the same time, even if the injection valve is continuously working at high speed, the internal cooling airflow can ensure that the valve body operates at low temperatures. In addition, the integrated nozzle heating element only heats the liquid inside the nozzle plate and has insulation design with the valve body.

5. Easy to carry. Only one signal trigger line and independentTS9200Connecting controllers enables complex dispensing operations.

Application of TS9200D

Crystal element bonding, fluorescent powder, red glue, UV materials and other adhesive applications in industries such as electrical equipment, LED, medical, etc. Applicable fluids: oil, grease, alcohol, solvents, red glue, silver paste, UV glue.

Characteristics of TS9200D

1. Non contact jet technology

2. High precision

3. High speed, accessible300spot/second

4. Minimum reusable single point10nl

5. Spray viscosity height400K Cps

6. No need to clean or replace the sealing

7. No need to clean or replace seals

8. Integrated heating element provides the required heat

9. Easy to install and operate

10. Low total usage cost