CLASSIFICATION
MFR-1300 series Metcal soldering station
.png)
MFR-1300 series Metcal soldering station
The MFR-1300 series tin suction and repair system is the new generation of independent tin suction equipment from OK International
Product Introduction
The MFR-1300 series tin suction and repair system is the new generation of independent tin suction equipment from OK International
The new power host integrates a built-in pump with a vacuum suction of up to 21 inches of mercury and SmartHeat technology, making it easier to disassemble and solder through-hole components, maintaining the safety of your product, and avoiding damage to the circuit board
The newly designed handle can be configured in two ways. Simply add an adjustment clip to the handle handle to switch the MFR-H5-DS to a pencil or gun style handle
The solder collection capacity of this machine has increased by 40% compared to the original MFR tin suction system, and the innovative replaceable collection chamber can reduce downtime and accelerate conversion speed
Main features
1. Powerful independent pump
2.2 in 1 ergonomic design and flexible handle: pencil or gun shaped
The capacity of the collection room has increased by 40%*
4. Innovative collection room for quick and convenient conversion
5. Dual output switch
6. Smartheat. Technical support provided
7. Compatible with the original MFR series tin suction equipment
*Compared to the original MFR-HDS tin suction handle
| Pencil | Gun type |
|
|
systemto configure
| model | name |
| MFR-1350 | Dual output switch type tin suction system with built-in vacuum pump |
| MFR-1351 | Dual output switch type welding/tin suction system with built-in vacuum pump |
The system includes
| model | MFR-PS1300 power supply | MFR-H5-DS tin suction handle | MFR-H1-SC welding handle | MFR-WSDSU universal soldering iron holder | WS1 universal welding iron frame |
| MFR-1350 | √ | √ | √ | ||
| MFR-1351 | √ | √ | √ | √ | √ |
System components
| Item number | name |
| MFR-PS1300 | Dual output switch type power supply host with built-in vacuum pump |
| MFR-H5-DS | Tin suction handle with adjustable grip and power cord |
| MFR-H1-SC | Soldering iron socket handle with power cord |
| MFR-WSDSU | Universal iron frame for tin suction handle |
| WS1 | Universal iron frame for welding handles |
picture
MFR-DC10
|
MFR-H5-DS
|
Grip for easy insertion into pencil style handle
|
MFR-H5-DS pencil configuration
|
MFR-H5-DS gun configuration
|
Quick collection room replacement
|
technical specificationsMFR-1350/1351
| Input line voltage | 100-240 volts AC |
| Input line frequency | 50/60 Hz |
| power waste | Maximum 110 watt MFR-PS1300 power supply |
| output power | Maximum 60 watt RFSmartHeat power supply |
| output frequency | 450 kHz |
| Temperature stability of idle soldering iron tips | ± 1.1 ° C (/-34 ° F) in still air |
| Environmental operating temperature | 10-40°C(50-104°F) |
| Maximum shell temperature | 55°C(131°F) |
| noise level | <55dB |
| Vacuum suction | The pressure of the vacuum pump at sea level reaches 0.7 bar and 21 inches of mercury |
| Power cord 3-core | 183 centimeters 72 inches |
| Tin suction handle cable length | 152cm 60 inches, anti burn, electrostatic protection safety certification |
| Welding handle cable length | 122cm 48 inches, anti burn, electrostatic protection safety certification |
| Handle connector | 8-core power connector |
| Soldering iron tip to ground potential | <2 millivolts |
| Resistance of soldering iron tip to ground | <2 ohms |
| Surface resistance | 105-109 ohms |
| authentication | cTUVus、CE |
| Approximately width x diameter x height in size | 170mm x 200mm x 152.5mm 7 inches x 8 inches x 6 inches |
| Iron holder size | 100mm x 200mm x 100mm 4 inches x 8 inches x 4 inches |
enclosure
| Item number | name |
| MFR-DC10 | 10 disposable collection rooms per pack for MFR-H5-DS |
| MFR-DC100 | Disposable collection room for MFR-H5-DS, with 100 pieces per package |
| MFR-PG | Replacement gun grip for MFR-H5-DS handle |
| MFR-HDCA | Heating core component for MFR tin suction handle - replaceable consumable part |
| MFR-WSDSCB | Soldering iron holder bracket |
| MFR-H5-DS-C | Tin suction handle and universal bracket assembly |
| AC-SK1 | Collection room sealing set, 2 pieces per pack |
| AC-VP | Vacuum port |
| AC-VL | Electrostatic discharge (ESD) trachea |
| AC-TC-P | Soldering iron tip cleaner (12 per pack) |
| AC-Y10 | Yellow sponge for soldering iron holder (10 per pack) |
| AC-BP | Copper pads for soldering iron holder (10 per pack) |
| AC-VPF | 5 vacuum port filters per pack |
The iron head
| Handle | The iron head |
| MFR-H5-DS | DxP seriesSoldering iron tip |
| MFR-H1-SC |
SxPandRxPSeries soldering and repair soldering iron tips |
